This is the latest recevied telemetry packets stored in our database for station/object SQ2CPA-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1794295995 | 355 Count | 486 Count | 249 Count | 4.08 VDC | 4.44 VDC |
| 1794294198 | 351 Count | 482 Count | 246 Count | 4.08 VDC | 4.42 VDC |
| 1794292402 | 348 Count | 479 Count | 244 Count | 4.07 VDC | 4.44 VDC |
| 1794290606 | 344 Count | 475 Count | 241 Count | 4.07 VDC | 1.2 VDC |
| 1794288810 | 340 Count | 471 Count | 238 Count | 4.07 VDC | 0 VDC |
| 1794287014 | 336 Count | 467 Count | 235 Count | 4.08 VDC | 0 VDC |
| 1794285217 | 331 Count | 462 Count | 231 Count | 4.08 VDC | 0 VDC |
| 1794283422 | 327 Count | 458 Count | 228 Count | 4.08 VDC | 0 VDC |
| 1794281626 | 323 Count | 454 Count | 225 Count | 4.08 VDC | 0 VDC |
| 1794279830 | 319 Count | 450 Count | 222 Count | 4.08 VDC | 0 VDC |
| 1794278034 | 315 Count | 446 Count | 219 Count | 4.08 VDC | 0 VDC |
| 1794276237 | 311 Count | 442 Count | 216 Count | 4.08 VDC | 0 VDC |
| 1794274442 | 308 Count | 439 Count | 214 Count | 4.08 VDC | 0 VDC |
| 1794272645 | 304 Count | 435 Count | 211 Count | 4.08 VDC | 0 VDC |
| 1794270850 | 300 Count | 431 Count | 208 Count | 4.08 VDC | 0 VDC |
| 1794269056 | 296 Count | 427 Count | 205 Count | 4.08 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)