This is the latest recevied telemetry packets stored in our database for station/object SQ4VW-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1794249081 | 299 Count | 665 Count | 134 Count | 0 VDC | 0 VDC |
| 1794248780 | 297 Count | 656 Count | 133 Count | 0 VDC | 0 VDC |
| 1794248479 | 293 Count | 647 Count | 131 Count | 0 VDC | 0 VDC |
| 1794248179 | 292 Count | 643 Count | 131 Count | 0 VDC | 0 VDC |
| 1794247878 | 289 Count | 638 Count | 130 Count | 0 VDC | 0 VDC |
| 1794247577 | 287 Count | 631 Count | 129 Count | 0 VDC | 0 VDC |
| 1794247277 | 284 Count | 628 Count | 128 Count | 0 VDC | 0 VDC |
| 1794246976 | 282 Count | 622 Count | 127 Count | 0 VDC | 0 VDC |
| 1794246675 | 278 Count | 614 Count | 125 Count | 0 VDC | 0 VDC |
| 1794246374 | 277 Count | 610 Count | 125 Count | 0 VDC | 0 VDC |
| 1794246074 | 273 Count | 602 Count | 123 Count | 0 VDC | 0 VDC |
| 1794245773 | 271 Count | 593 Count | 122 Count | 0 VDC | 0 VDC |
| 1794245228 | 266 Count | 583 Count | 120 Count | 0 VDC | 0 VDC |
| 1794244927 | 262 Count | 576 Count | 118 Count | 0 VDC | 0 VDC |
| 1794244626 | 261 Count | 571 Count | 118 Count | 0 VDC | 0 VDC |
| 1794244325 | 257 Count | 563 Count | 116 Count | 0 VDC | 0 VDC |
| 1794244025 | 255 Count | 555 Count | 115 Count | 0 VDC | 0 VDC |
| 1794243724 | 252 Count | 551 Count | 114 Count | 0 VDC | 0 VDC |
| 1794243423 | 250 Count | 543 Count | 113 Count | 0 VDC | 0 VDC |
| 1794243122 | 246 Count | 534 Count | 111 Count | 0 VDC | 0 VDC |
| 1794242822 | 245 Count | 530 Count | 111 Count | 0 VDC | 0 VDC |
| 1794242521 | 242 Count | 521 Count | 110 Count | 0 VDC | 0 VDC |
| 1794242220 | 240 Count | 511 Count | 109 Count | 0 VDC | 0 VDC |
| 1794241920 | 237 Count | 507 Count | 108 Count | 0 VDC | 0 VDC |
| 1794241619 | 235 Count | 501 Count | 107 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)