This is the latest recevied telemetry packets stored in our database for station/object SP2DRP-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1794245382 | 256 Count | 829 Count | 229 Count | 0 VDC | 0 VDC |
| 1794243581 | 233 Count | 781 Count | 207 Count | 0 VDC | 0 VDC |
| 1794239986 | 204 Count | 718 Count | 184 Count | 0 VDC | 0 VDC |
| 1794238186 | 194 Count | 684 Count | 175 Count | 0 VDC | 0 VDC |
| 1794236386 | 183 Count | 654 Count | 165 Count | 0 VDC | 0 VDC |
| 1794234584 | 174 Count | 626 Count | 157 Count | 0 VDC | 0 VDC |
| 1794232784 | 162 Count | 597 Count | 146 Count | 0 VDC | 0 VDC |
| 1794230983 | 151 Count | 559 Count | 136 Count | 0 VDC | 0 VDC |
| 1794229183 | 139 Count | 532 Count | 125 Count | 0 VDC | 0 VDC |
| 1794227382 | 130 Count | 504 Count | 117 Count | 0 VDC | 0 VDC |
| 1794225580 | 110 Count | 419 Count | 98 Count | 0 VDC | 0 VDC |
| 1794223781 | 100 Count | 385 Count | 89 Count | 0 VDC | 0 VDC |
| 1794221979 | 85 Count | 346 Count | 75 Count | 0 VDC | 0 VDC |
| 1794218387 | 60 Count | 275 Count | 56 Count | 0 VDC | 0 VDC |
| 1794216586 | 51 Count | 213 Count | 48 Count | 0 VDC | 0 VDC |
| 1794212984 | 25 Count | 93 Count | 24 Count | 0 VDC | 0 VDC |
| 1794211184 | 16 Count | 42 Count | 16 Count | 0 VDC | 0 VDC |
| 1794209383 | 383 Count | 1028 Count | 340 Count | 0 VDC | 0 VDC |
| 1794207582 | 371 Count | 991 Count | 329 Count | 0 VDC | 0 VDC |
| 1794205781 | 360 Count | 955 Count | 319 Count | 0 VDC | 0 VDC |
| 1794203981 | 349 Count | 924 Count | 309 Count | 0 VDC | 0 VDC |
| 1794202179 | 338 Count | 891 Count | 299 Count | 0 VDC | 0 VDC |
| 1794200379 | 323 Count | 854 Count | 285 Count | 0 VDC | 0 VDC |
| 1794196783 | 294 Count | 787 Count | 262 Count | 0 VDC | 0 VDC |
| 1794194983 | 282 Count | 753 Count | 251 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 0.01, 0
Value5: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)