This is the latest recevied telemetry packets stored in our database for station/object SP2ROC-14. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1794256166 | 267 Count | 799 Count | 170 Count | 0 VDC | 0 VDC |
| 1794255865 | 263 Count | 789 Count | 167 Count | 0 VDC | 0 VDC |
| 1794255565 | 261 Count | 786 Count | 166 Count | 0 VDC | 0 VDC |
| 1794255264 | 256 Count | 774 Count | 162 Count | 0 VDC | 0 VDC |
| 1794254963 | 254 Count | 769 Count | 161 Count | 0 VDC | 0 VDC |
| 1794254663 | 253 Count | 766 Count | 161 Count | 0 VDC | 0 VDC |
| 1794254362 | 249 Count | 755 Count | 158 Count | 0 VDC | 0 VDC |
| 1794254062 | 245 Count | 746 Count | 155 Count | 0 VDC | 0 VDC |
| 1794253761 | 242 Count | 737 Count | 153 Count | 0 VDC | 0 VDC |
| 1794253460 | 239 Count | 727 Count | 151 Count | 0 VDC | 0 VDC |
| 1794253160 | 237 Count | 723 Count | 150 Count | 0 VDC | 0 VDC |
| 1794252859 | 235 Count | 720 Count | 149 Count | 0 VDC | 0 VDC |
| 1794252559 | 230 Count | 707 Count | 145 Count | 0 VDC | 0 VDC |
| 1794252257 | 226 Count | 698 Count | 142 Count | 0 VDC | 0 VDC |
| 1794251956 | 224 Count | 695 Count | 141 Count | 0 VDC | 0 VDC |
| 1794251656 | 221 Count | 687 Count | 139 Count | 0 VDC | 0 VDC |
| 1794251355 | 219 Count | 683 Count | 138 Count | 0 VDC | 0 VDC |
| 1794251055 | 217 Count | 679 Count | 137 Count | 0 VDC | 0 VDC |
| 1794250754 | 214 Count | 672 Count | 135 Count | 0 VDC | 0 VDC |
| 1794250453 | 210 Count | 664 Count | 132 Count | 0 VDC | 0 VDC |
| 1794250153 | 208 Count | 660 Count | 131 Count | 0 VDC | 0 VDC |
| 1794249852 | 206 Count | 653 Count | 130 Count | 0 VDC | 0 VDC |
| 1794249552 | 204 Count | 649 Count | 129 Count | 0 VDC | 0 VDC |
| 1794249251 | 202 Count | 646 Count | 128 Count | 0 VDC | 0 VDC |
| 1794248951 | 196 Count | 630 Count | 123 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)