This is the latest recevied telemetry packets stored in our database for station/object SP9KKK-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1794263479 | 161 Count | 746 Count | 156 Count | 3.82 VDC | 0 VDC |
| 1794262578 | 135 Count | 610 Count | 131 Count | 3.83 VDC | 0 VDC |
| 1794261677 | 103 Count | 481 Count | 100 Count | 3.82 VDC | 0 VDC |
| 1794260777 | 79 Count | 353 Count | 77 Count | 3.83 VDC | 0 VDC |
| 1794259876 | 52 Count | 231 Count | 51 Count | 3.83 VDC | 0 VDC |
| 1794258975 | 26 Count | 112 Count | 26 Count | 3.84 VDC | 0 VDC |
| 1794258074 | 232 Count | 1032 Count | 226 Count | 3.84 VDC | 0 VDC |
| 1794257173 | 209 Count | 904 Count | 204 Count | 3.84 VDC | 0 VDC |
| 1794256273 | 179 Count | 776 Count | 175 Count | 3.84 VDC | 0 VDC |
| 1794255372 | 128 Count | 564 Count | 125 Count | 3.84 VDC | 0 VDC |
| 1794254471 | 99 Count | 443 Count | 97 Count | 3.84 VDC | 0 VDC |
| 1794253570 | 71 Count | 319 Count | 70 Count | 3.85 VDC | 0 VDC |
| 1794252669 | 27 Count | 130 Count | 27 Count | 3.85 VDC | 0 VDC |
| 1794251768 | 253 Count | 1045 Count | 241 Count | 3.85 VDC | 0 VDC |
| 1794250868 | 219 Count | 901 Count | 208 Count | 3.85 VDC | 0 VDC |
| 1794249967 | 188 Count | 799 Count | 178 Count | 3.85 VDC | 0 VDC |
| 1794249066 | 161 Count | 677 Count | 152 Count | 3.85 VDC | 0 VDC |
| 1794248165 | 131 Count | 545 Count | 123 Count | 3.85 VDC | 0 VDC |
| 1794247264 | 106 Count | 445 Count | 99 Count | 3.85 VDC | 0 VDC |
| 1794246363 | 81 Count | 320 Count | 75 Count | 3.85 VDC | 0 VDC |
| 1794245463 | 55 Count | 219 Count | 50 Count | 3.87 VDC | 0 VDC |
| 1794244562 | 30 Count | 102 Count | 26 Count | 3.85 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)