This is the latest recevied telemetry packets stored in our database for station/object SP1ZS-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1794268905 | 190 Count | 353 Count | 150 Count | 3.36 VDC | 0 VDC |
| 1794268305 | 177 Count | 331 Count | 140 Count | 3.34 VDC | 0 VDC |
| 1794267704 | 162 Count | 294 Count | 127 Count | 3.36 VDC | 0 VDC |
| 1794267103 | 150 Count | 269 Count | 117 Count | 3.36 VDC | 0 VDC |
| 1794266503 | 138 Count | 245 Count | 108 Count | 3.36 VDC | 0 VDC |
| 1794265902 | 128 Count | 229 Count | 100 Count | 3.36 VDC | 0 VDC |
| 1794265302 | 116 Count | 209 Count | 91 Count | 3.36 VDC | 0 VDC |
| 1794264701 | 98 Count | 177 Count | 75 Count | 3.37 VDC | 0 VDC |
| 1794264100 | 85 Count | 158 Count | 65 Count | 3.37 VDC | 0 VDC |
| 1794263500 | 77 Count | 147 Count | 59 Count | 3.38 VDC | 0 VDC |
| 1794262899 | 67 Count | 132 Count | 51 Count | 3.38 VDC | 0 VDC |
| 1794262299 | 56 Count | 116 Count | 43 Count | 3.39 VDC | 0 VDC |
| 1794261698 | 47 Count | 102 Count | 36 Count | 3.39 VDC | 0 VDC |
| 1794261097 | 36 Count | 83 Count | 28 Count | 3.4 VDC | 0 VDC |
| 1794260497 | 25 Count | 59 Count | 19 Count | 3.4 VDC | 0 VDC |
| 1794259896 | 15 Count | 38 Count | 12 Count | 3.41 VDC | 0 VDC |
| 1794259295 | 7 Count | 19 Count | 6 Count | 3.41 VDC | 0 VDC |
| 1794258695 | 525 Count | 1001 Count | 413 Count | 3.42 VDC | 0 VDC |
| 1794258094 | 514 Count | 969 Count | 405 Count | 3.42 VDC | 0 VDC |
| 1794257494 | 505 Count | 938 Count | 398 Count | 3.44 VDC | 0 VDC |
| 1794256893 | 492 Count | 913 Count | 388 Count | 3.57 VDC | 0 VDC |
| 1794256292 | 485 Count | 900 Count | 383 Count | 3.55 VDC | 0 VDC |
| 1794255691 | 476 Count | 883 Count | 377 Count | 3.53 VDC | 0 VDC |
| 1794255091 | 469 Count | 869 Count | 372 Count | 3.52 VDC | 0 VDC |
| 1794254490 | 462 Count | 850 Count | 367 Count | 3.46 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)