This is the latest recevied telemetry packets stored in our database for station/object SP8SZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1794255108 | 297 Count | 681 Count | 289 Count | 0 VDC | 0 VDC |
| 1794253308 | 272 Count | 627 Count | 265 Count | 0 VDC | 0 VDC |
| 1794251507 | 247 Count | 571 Count | 241 Count | 0 VDC | 0 VDC |
| 1794249708 | 209 Count | 486 Count | 204 Count | 0 VDC | 0 VDC |
| 1794247906 | 176 Count | 399 Count | 172 Count | 0 VDC | 0 VDC |
| 1794246105 | 130 Count | 298 Count | 127 Count | 0 VDC | 0 VDC |
| 1794244305 | 96 Count | 225 Count | 94 Count | 0 VDC | 0 VDC |
| 1794242504 | 51 Count | 132 Count | 50 Count | 0 VDC | 0 VDC |
| 1794240706 | 25 Count | 67 Count | 25 Count | 0 VDC | 0 VDC |
| 1794238903 | 437 Count | 1022 Count | 422 Count | 0 VDC | 0 VDC |
| 1794237102 | 405 Count | 946 Count | 391 Count | 0 VDC | 0 VDC |
| 1794235302 | 374 Count | 872 Count | 361 Count | 0 VDC | 0 VDC |
| 1794233508 | 338 Count | 790 Count | 330 Count | 0 VDC | 0 VDC |
| 1794231708 | 312 Count | 725 Count | 305 Count | 0 VDC | 0 VDC |
| 1794229907 | 263 Count | 625 Count | 257 Count | 0 VDC | 0 VDC |
| 1794228106 | 218 Count | 514 Count | 213 Count | 0 VDC | 0 VDC |
| 1794226306 | 191 Count | 447 Count | 187 Count | 0 VDC | 0 VDC |
| 1794224505 | 158 Count | 370 Count | 155 Count | 0 VDC | 0 VDC |
| 1794222705 | 101 Count | 244 Count | 99 Count | 0 VDC | 0 VDC |
| 1794220903 | 59 Count | 143 Count | 58 Count | 0 VDC | 0 VDC |
| 1794219103 | 28 Count | 69 Count | 28 Count | 0 VDC | 0 VDC |
| 1794217302 | 423 Count | 1050 Count | 408 Count | 0 VDC | 0 VDC |
| 1794215501 | 339 Count | 834 Count | 325 Count | 0 VDC | 0 VDC |
| 1794213701 | 307 Count | 753 Count | 294 Count | 0 VDC | 0 VDC |
| 1794211906 | 277 Count | 683 Count | 269 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)