This is the latest recevied telemetry packets stored in our database for station/object SOMTNP. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | RX_rate* | RelRate* | DrpRate* |
|---|---|---|---|---|---|
| 1794243168 | 4.21 VDC | 5.44 VDC | 450 pkt/h | 96 pkt/h | 354 pkt/h |
| 1794242568 | 4.21 VDC | 5.46 VDC | 558 pkt/h | 108 pkt/h | 450 pkt/h |
| 1794241968 | 4.2 VDC | 5.44 VDC | 642 pkt/h | 120 pkt/h | 522 pkt/h |
| 1794241368 | 4.19 VDC | 5.44 VDC | 342 pkt/h | 66 pkt/h | 276 pkt/h |
| 1794240768 | 4.19 VDC | 5.44 VDC | 474 pkt/h | 108 pkt/h | 366 pkt/h |
| 1794240167 | 4.19 VDC | 5.44 VDC | 528 pkt/h | 102 pkt/h | 426 pkt/h |
| 1794239567 | 4.18 VDC | 5.44 VDC | 456 pkt/h | 84 pkt/h | 372 pkt/h |
| 1794238967 | 4.18 VDC | 5.44 VDC | 822 pkt/h | 168 pkt/h | 654 pkt/h |
| 1794238367 | 4.18 VDC | 5.44 VDC | 732 pkt/h | 144 pkt/h | 588 pkt/h |
| 1794237766 | 4.17 VDC | 5.44 VDC | 930 pkt/h | 180 pkt/h | 750 pkt/h |
| 1794237166 | 4.16 VDC | 5.44 VDC | 1278 pkt/h | 288 pkt/h | 990 pkt/h |
| 1794236566 | 4.14 VDC | 5.44 VDC | 558 pkt/h | 114 pkt/h | 444 pkt/h |
| 1794235966 | 4.14 VDC | 5.44 VDC | 714 pkt/h | 144 pkt/h | 570 pkt/h |
| 1794235366 | 4.13 VDC | 5.44 VDC | 834 pkt/h | 168 pkt/h | 666 pkt/h |
| 1794234766 | 4.13 VDC | 5.44 VDC | 798 pkt/h | 150 pkt/h | 648 pkt/h |
| 1794234166 | 4.13 VDC | 5.44 VDC | 528 pkt/h | 108 pkt/h | 420 pkt/h |
| 1794233565 | 4.13 VDC | 5.44 VDC | 588 pkt/h | 120 pkt/h | 468 pkt/h |
| 1794232965 | 4.12 VDC | 5.44 VDC | 570 pkt/h | 114 pkt/h | 456 pkt/h |
| 1794232365 | 4.12 VDC | 5.44 VDC | 624 pkt/h | 162 pkt/h | 462 pkt/h |
| 1794231765 | 4.12 VDC | 4.98 VDC | 613 pkt/h | 130 pkt/h | 483 pkt/h |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
RX_rate: 0, 1, 0
RelRate: 0, 1, 0
DrpRate: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)