This is the latest recevied telemetry packets stored in our database for station/object SQ2MTG-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1794256798 | 176 Count | 468 Count | 144 Count | 4.12 VDC | 0 VDC |
| 1794255896 | 172 Count | 455 Count | 141 Count | 4.12 VDC | 0 VDC |
| 1794254995 | 168 Count | 444 Count | 138 Count | 4.12 VDC | 0 VDC |
| 1794254094 | 160 Count | 426 Count | 131 Count | 4.12 VDC | 0 VDC |
| 1794253194 | 155 Count | 415 Count | 127 Count | 4.13 VDC | 0 VDC |
| 1794252293 | 151 Count | 406 Count | 124 Count | 4.12 VDC | 0 VDC |
| 1794251392 | 148 Count | 402 Count | 122 Count | 4.13 VDC | 0 VDC |
| 1794250491 | 145 Count | 397 Count | 120 Count | 4.13 VDC | 0 VDC |
| 1794249590 | 141 Count | 393 Count | 117 Count | 4.13 VDC | 0 VDC |
| 1794248689 | 136 Count | 387 Count | 113 Count | 4.13 VDC | 0 VDC |
| 1794247789 | 131 Count | 380 Count | 109 Count | 4.13 VDC | 0 VDC |
| 1794246888 | 124 Count | 357 Count | 103 Count | 4.12 VDC | 0 VDC |
| 1794245987 | 116 Count | 330 Count | 96 Count | 4.13 VDC | 0 VDC |
| 1794245086 | 109 Count | 311 Count | 90 Count | 4.13 VDC | 0 VDC |
| 1794244185 | 95 Count | 283 Count | 77 Count | 4.13 VDC | 0 VDC |
| 1794243285 | 88 Count | 256 Count | 71 Count | 4.13 VDC | 0 VDC |
| 1794242384 | 81 Count | 234 Count | 65 Count | 4.12 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)