APRS-MX Track Direct

☰

reset

ON3JCA-9 Raw Packets

This is the latest recevied packets stored in our database for station/object ON3JCA-9. If no packets are shown the sender has not sent any packets the latest 24 hours.

If you compare the raw packets with similar data from other websites it may differ (especially the path), the reason is that we are not collecting packets from the same APRS-IS servers. Each APRS-IS server performes duplicate filtering, and which packet that is considered to be a duplicate may differ depending on which APRS-IS server you receive your data from.

1794225785: ON3JCA-9>APLT00,WIDE1-1,qAO,ON2ACO-26:!5100.42N/00312.51E>/A=000121LoRa_APRS_Tracker JOHAN ON3JCA - Bat.: 2.91V !w0#!

1794225485: ON3JCA-9>APLT00,WIDE1-1,qAO,ON2ACO-26:!5100.42N/00312.51E>/A=000139LoRa_APRS_Tracker JOHAN ON3JCA - Bat.: 2.96V !w;.!

1794225185: ON3JCA-9>APLT00,WIDE1-1,qAO,ON2ACO-26:!5100.42N/00312.51E>/A=000135LoRa_APRS_Tracker JOHAN ON3JCA - Bat.: 3.01V !w>6!

1794224885: ON3JCA-9>APLT00,WIDE1-1,qAO,ON2ACO-26:!5100.42N/00312.51E>/A=000154LoRa_APRS_Tracker JOHAN ON3JCA - Bat.: 3.06V !w6:!

1794224585: ON3JCA-9>APLT00,WIDE1-1,qAO,ON2ACO-26:!5100.42N/00312.51E>/A=000160LoRa_APRS_Tracker JOHAN ON3JCA - Bat.: 3.11V !wD(!

1794224285: ON3JCA-9>APLT00,WIDE1-1,qAO,ON2ACO-26:!5100.42N/00312.51E>/A=000140LoRa_APRS_Tracker JOHAN ON3JCA - Bat.: 3.16V !w91!

1794223986: ON3JCA-9>APLT00,WIDE1-1,qAO,ON2ACO-26:!5100.42N/00312.51E>047/000/A=000141LoRa_APRS_Tracker JOHAN ON3JCA - Bat.: 3.20V !w30!

1794223686: ON3JCA-9>APLT00,WIDE1-1,qAO,ON2ACO-26:!5100.42N/00312.51E>047/000/A=000150LoRa_APRS_Tracker JOHAN ON3JCA - Bat.: 3.25V !w.;!

1794223386: ON3JCA-9>APLT00,WIDE1-1,qAO,ON2ACO-26:!5100.42N/00312.51E>047/000/A=000144LoRa_APRS_Tracker JOHAN ON3JCA - Bat.: 3.29V !w..!

1794223085: ON3JCA-9>APLT00,WIDE1-1,qAO,ON2ACO-26:!5100.46N/00312.49E>100/020/A=000181 - Bat.: 3.48V !wY!!

1794223073: ON3JCA-9>APLT00,WIDE1-1,qAO,ON2ACO-26:!5100.46N/00312.40E>358/008/A=000191 - Bat.: 3.48V !w);!

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time:

Maintained by Homero Lozano, XE2KK, based on APRS Track Direct